Suspension Thread with cogs, flexible and elastic, for the face and arms.
Diameter of the core 0,5 mm, length 300 mm, extended by a traction wire of 200 mm on each side.
The cogs are convergent.
This thread must be set up with the specific BASE 13-200 STE needle, not with a trocar needle.

Suspension Thread with cogs, flexible and elastic, set with two 150 mm needles, for the face and arms.
This thread is identical to the reference above, diameter of the core 0,5 mm, length 300 mm, extended with a traction wire of 150 mm on each side, but it is crimped with two needles of 150 mm long and of 1,3 mm of diameter. The needles are bendable and have a soft, non traumatic end.

Spatula Needle Pin, sterile, to use with the FL 6-300 thread.
Lengh 200 mm, diameter 1,3 mm.
Made of stainless steel, rigid but bendable, with a soft end on one side and a rounded one on the other side. There is an eye to set the traction wire on each side of the needle.

Suspension Thread with cogs, flexible and elastic, without needles, for the body : breast, belly, tights, bottom.
Diameter of the core 0,8 mm, length 300 mm, extended by a traction wire of 200 mm on each side. The cogs are convergent.
This wire must be set up with the specific BASE 20-250 STE needle, not with a trocar

Suspension Thread with cogs, flexible and elastic, without needles, for the body : breast, belly, tights, bottom.
This wire is different from the one above since there is a central part of 50 mm without any cogs (sub mammary path).
Diamater of the core 0,8 mm, length 350 mm, extended by a traction wire of 200 mm on each side. The cogs are convergent.
This wire must be set with the specific BASE 20-250 STE needle, not with a trocar needle.

Spatula Needle Pin, sterile, to use with the BL 8-300 and BL 50-350 threads.
Length 250 mm, diameter 2 mm.
Made of stainless steel, rigid but bendable, with a soft end on one side and a rounded one on the other side. There is an eye to set the traction wire on each side of the needle.